undefined
+
  • undefined

Podium

Specification: W1400mm×D600mm×H760mm

Keywords:

Others

Category:

Others

Product Inquiry:

jirong677@126.com

Product Quotation
Related Products
  • Product Description

  • 1. Specifications: W1400mm×D600mm×H760mm (the above dimensions allow a deviation of ±5mm)

    2. Veneer: Walnut veneer with a thickness of 0.8mm, wood moisture content ≤10%; meets the standard requirements of GB/T 17657-2013.

    3. Substrate: Flame-retardant medium-density fiberboard, thickness 18mm, combustion growth rate index FIGRA 0.2MJ ≤100W/s, flame lateral spread does not reach the long wing edge of the sample, total heat release THR within 600s 600s ≤3MJ, flame tip height FS ≤60mm within 60s, no ignition of filter paper by burning droplets within 60s, smoke generation rate index ≤30m²/s², total smoke generation within 600s ≤80m², no burning droplets/particles within 600s, smoke toxicity level reaches ZA 3 level 。

    4. Phenolic resin adhesive: Total volatile organic compounds ≤30g/L, toluene + xylene not detected, benzene ≤0.05g/kg, free formaldehyde ≤0.2g/kg.

    5. Paint: Uses "China Resources" water-based paint, VOC content ≤20g/L, formaldehyde content ≤10mg/kg, total content of glycol ethers and ether esters ≤5mg/kg, total benzene series not detected, hardness ≥3H, meets the standard requirements of GB/T 23999-2009.

    6. ▲Three-in-one fasteners exceed the requirements of GB/T 28203-2011 "Technical Requirements and Test Methods for Furniture Connectors", GB/T3325-2017 "General Technical Conditions for Metal Furniture", QB/T4767-2014 "Steel Components for Furniture", GB/T6739-2006 "Pencil Hardness Test for Paint and Varnish Films", GB/T 10125-2021 "Artificial Atmosphere Corrosion Test Salt Spray Test", GB/T 6461-2002 "Rating of Samples and Specimens of Metal and Other Inorganic Coatings on Metal Substrates after Corrosion Tests", QB/T3826-1999 "Corrosion Resistance Test Methods for Metal Coatings and Chemical Treatment Layers of Light Industry Products - Neutral Salt Spray Test (NSS) Method", QB/T3827-1999 "Corrosion Resistance Test Methods for Metal Coatings and Chemical Treatment Layers of Light Industry Products - Acetic Acid Salt Spray Test (ASS) Method", QB/T3832-1999 "Evaluation of Corrosion Test Results for Metal Coatings of Light Industry Products". Testing content includes but is not limited to: mechanical properties (tensile strength of embedded nuts in three-in-one eccentric connectors, tensile strength of threaded connecting screws and embedded nuts in three-in-one eccentric connectors, torque between eccentric body and connecting screw in three-in-one eccentric connectors, all test results are compliant), acetic acid salt spray test continuous spraying ≥480h corrosion resistance level ≥10, neutral salt spray test continuous spraying ≥480h corrosion resistance level ≥10. 7. Finished podium: Formaldehyde emission of wooden parts ≤0.5mg/L, meets the standard requirements of GB/T 3324-2017.

Product Quotation

Please fill in your phone and E-mail information, we will contact you within one working day to promptly resolve your issues.

Submit Now

Related Products